#SONANCE C4630 HOW TO#
#SONANCE C4630 DRIVER#

At the factory, both trim pots have been set for +10 dB gain on all three sets of outputs.

#SONANCE C4630 DRIVER#

The AVCDWP2 Driver Wall Plate includes two trim pots for individual adjustment of the systemвЂ™s left and right audio channels (see detail in Figure 2 on page 2). Beyond that, you will need to divide the system so it is driven from two or more AVCDWP2s. One (1) AVCDWP2 Driver Wall Plate can drive a system of up to 100 AVC100R/SLs. If additional AVC100R/SLs are required in the installation, connect one (1) recommended power supply for each additional group of six (6) AVC100R/SLs (see detail in Figure 2 on page 2).Дў. One (1) recommended power supply +24 Vdc powers up to six (6) AVC100R/SLs. There is virtually no limit on how many AVC100R/SLs are interconnected in a system, as long as the following conditions are met:ДЎ. NOTE: Do not connect a signal power cable to the вЂњSPEAKERвЂќ output connector on any AVC100R/SL.

#SONANCE C4630 HOW TO#

Study the examples in Figures 2 through 3 (on the next two pages) to learn how to interconnect systems using these wiring schemes. Any combination of daisy-chain and home-run wiring.

The AVC system can be connected in any of the following ways:

It is identical in operation and specifications to the AVC100R, except a continuously-variable slider is provided in place of a rotary knob.ДЄny UL Listed regulated switching power supply, input rated 90-240Vac, output rated 24Vdc, 2.5A with 2.1mm mini-plug and marked вЂњClass 2вЂќ(see specifications on page 4). The AVC100SL is a slider-controlled Amplified Volume Control. The DWP2 also provides installer-adjustable gain controls for setting the maximum system volume level (see the detail in Figure 2 on the next page).ДЄ V C 1 0 0 R / A V C 1 0 0 S L / A V C D W P 2 A V C A U D I O D I S T R I B U T I O N S Y S T E M One DWP2 may be used with up to 100 AVC100R/SLs via standard 16/4 or 14/4 wire. Three parallel four conductor outputs with quick disconnect terminals are provided. The unit fits into a standard single-gang plaster ring. The DWP2 is a Driver Wall Plate for audio distribution of a connected stereo source and routing of AVC power from a connected recommended power supply. The AVC100R fits into a standard single-gang plaster ring. The unit provides 4-conductor quick-disconnect terminals for input, a looping output, and connection to local speakers.

The knob action continuously varies the volume of the internal amplifier from zero to maximum volume. It provides the equivalent of 30 watts of amplification at the head end of conventional audio system run over 100 feet of wire. The AVC100R is a rotary-knob Amplified Volume Control. WARNING: TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.Д¬AUTION: RISK OF ELECTRIC SHOCK - DO NOT OPEN

Sonance c4630